Description
| Name of product | H-9 Dual Layer Glass Coat |
|---|---|
| JAN code | 4975759101178 |
| Content | Primer Liquid 100ml Top Coat Liquid 100ml Sponge with Buff × 2pc Exclusive Cloth × 2pc Gloves x 2pc |
| Ingredients and materials | Silicon-based mixture, petroleum solvent |
How to use the product
* Before application, be sure to wash, de-iron, polish, and degrease the paintwork.* Do not apply all at once. Work panel-by-panel. * Be sure to cool the car body if hot.
- Set the inner flow-limiter into the neck of Base Coat.
- Put a moderate amount of liquid onto the white surface of the sponge and apply to the body in a criss-cross pattern to prevent gaps and unevenness.
- Wipe off with attached towel before coated surface gets dry. * In cold or otherwise slow-drying environments, immediately repeat Steps 2 & 3 one time.
- Shake the Top Coat thoroughly, then set the flow-limiter.
- 20-30 minutes after wiping off the Base Coat, put the Top Coat liquid onto the white surface of a new sponge.
* Apply panel-by-panel in the same order as Base Coat.* Be sure to shake the Top Coat thoroughly, ensure there is not sediment present.
- When the Top Coat has dried, wipe off with a fresh towel.
* Reference times for drying: 1 minute in summer, 2-5 minutes in winter.
- After coating, leave to cure in a dry place for 12 hours.
