Description
| Name of product | Rain Burst |
|---|---|
| JAN code | 4975759049562 |
| Content | 70ml |
| Ingredients and materials | Petrochemical solvents, silicone resin, silicone oil |
How to use the Product
- Use only with helmet removed. Do not use while wearing the helmet.
- Usage when dry:
Clean the helmet according to the manufacturer’s instructions.
- Close the visor and spray from about 5 cm away, for around one second, from left edge to right edge.
- Spread around the liquid with a tissue to cover the whole surface.
- Wait for the liquid to dry (20-60 seconds) before wiping clear with another tissue.
- In the case of unevenness, wipe once more with a fresh tissue.
Do not use wet wipes, moisturizing tissues, towels, or microfiber cloths.
- Usage when wet: Close the visor and spray without drying from about 5 cm away, for around one second, from left edge to right edge.
- Quickly spread around the liquid with a tissue to cover the whole surface.
In the case of unevenness, wipe once more with a fresh tissue.
Do not use wet wipes, moisturizing tissues, towels, or microfiber cloths.
Precautions for Use
- USE ONLY FOR INTENDED PURPOSE.
- USE ONLY IN WELL-VENTILATED AREAS.
- DO NOT USE WHILE DRIVING.
- DO NOT USE IN DIRECT SUNLIGHT OR ON HOT SURFACES.
- DO NOT USE WHILE WEARING HELMET.
- AVOID CONTACT WITH OTHER SURFACES. MAY CAUSE STAINING OR DEFORMATION. IF CONTACT OCCURS, WIPE OFF IMMEDIATELY WITH A DAMP TOWEL.
- DO NOT LEAVE FOR EXCESSIVELY LONG PERIODS. MAY CAUSE STAINING OR DEGRADATION.
- DO NOT USE SANDY PAPER. MAY CAUSE SCRATCHES.
- DO NOT SCRUB WITH EXCESSIVE FORCE. MAY CAUSE SCRATCHES.
- WHEN USING FOR THE FIRST TIME, TRAFFIC FILM, DIRT, OR OTHER COATINGS MAY PREVENT FULL EFFECT. CONSULT HELMET MANUAL FOR PROPER MAINTENANCE PROCEDURES TO CLEAN SURFACE.
- AFTER APPLICATION, CHECK VISIBILITY BEFORE RIDING.
- IN CERTAIN CONDITIONS OF SUDDEN CHANGES IN TEMPERATURE/HUMIDITY, VISOR MAY CLOUD. TAKE CARE, AND OPEN VISOR.
AFTER A PERIOD OF USE, HYDROPHOBIC EFFECT WILL BECOME UNEVEN. IN THIS CASE, REAPPLY. - WASH HANDS WELL WITH SOAP AFTER USE.
- DO NOT USE ON SPECIALLY-COATED VISORS.
- TEST ON AN INCONSPICUOUS AREA BEFORE USE.
Warnings and General Notes
- DO NOT EAT OR INHALE. HARMFUL.
- AS SKIN IRRITATION MAY OCCUR, PLEASE WEAR PROTECTIVE GLOVES.
- RISK OF RUPTURE. KEEP BELOW 40℃ AND OUT OF DIRECT SUNLIGHT.
- FLAMMABLE. KEEP AWAY FROM HEAT AND FIRE.
- DO NOT SPRAY TOWARDS PEOPLE.
- KEEP OUT OF REACH OF CHILDREN AND VULNERABLE PEOPLE.
